Hertsmere Driveways logo
Block paving 01

Stanmore

Block Paving in Stanmore

Block paving laid on a proper base, with the edges restrained so it stays put. Free survey, a fixed written price, and you only pay when you're happy with the work.

Free Quote in Stanmore

Rated on TrustATrader

From 107 genuine customer reviews

Award-Winning

Driveway & Landscaping Company of the Year

Family-Run & Insured

Recommended by repeat customers

Guarantee

You don't pay until you're happy

Block Paving in Stanmore, explained

Most block paving that goes wrong did not go wrong at the top. It spread at an unrestrained edge, or it sank where the sub-base was never compacted properly, and the blocks themselves were never the problem. So that is where the money goes on our quotes, and it is what we look at first when somebody asks us to put a failed drive right.

The choice in front of you is bigger than it looks. Block range, colour, size, texture, laying pattern, border, and whether you want a permeable block so the drive drains through itself. We bring the ranges to the survey and lay a few options out on the ground, because a block looks different in a brochure to how it looks next to your brick in daylight.

We are based in Hatfield and this area is part of our normal round. The survey and the written price are free, there is no deposit, and you settle up when the drive is finished, swept and signed off.

We cover the HA7 postcode in Stanmore, and the rest of London NW.

What your quote covers

  • A free survey with block ranges and patterns to look at on the ground
  • One fixed price in writing, no deposit, nothing payable until the job is done
  • Excavation to the depth the ground and the traffic actually call for
  • A compacted sub-base, a screeded laying course, and edge restraints haunched in concrete
  • Blocks laid to your pattern, cut in around manholes, kerbs and the threshold
  • Kiln-dried sand brushed in, the drive vibrated, a second sanding pass, and the site swept clean

Choosing block paving in Stanmore

Because it comes apart, block paving is the most forgiving driveway surface you can own. A utility dig, a spill that stains a corner, a section that settles: the blocks in question are lifted, the problem gets sorted and those blocks are relaid. That is not possible with anything else.

Do not think of the pattern as purely visual. Herringbone is used as standard wherever a car sits because it interlocks under turning and braking loads. Paths and edges that only see foot traffic can take stretcher or basketweave. We will work through which suits your layout at the survey.

Permeable blocks are worth asking about if drainage is tight. They go down with wider joints filled with clean grit, which lets water drain through the surface instead of off it. With any block paving, the trade-off is the joints. Their sand needs keeping topped up, otherwise weeds find a way in.

Thinking about block paving in Stanmore?

Block paving 02

From first visit to finished job

  1. Step 1

    Free Site Survey

    We measure the area and go through block ranges, colours and laying patterns with you.

  2. Step 2

    Written Quotation

    A fixed written price, with nothing to pay up front.

  3. Step 3

    Base Preparation

    We dig out, remove the spoil and build a firm, well-drained sub-base.

  4. Step 4

    Laying

    Blocks are laid to pattern, cut in neatly and locked with an edge restraint.

  5. Step 5

    Finishing

    Joints are filled with kiln-dried sand, the drive is compacted and swept, and you sign it off.

Block paving 03

What happens on site in Stanmore

We excavate down to the depth your build-up requires, then put in a sub-base and compact it in layers. The edge restraints are one of the first things to go in, haunched in concrete. An unrestrained edge is the most common single cause of a block drive spreading and loosening at the sides.

On top of the compacted base we screed the laying course, then lay the blocks in the agreed pattern, working off the fixed edge. Wherever the blocks meet a manhole, a kerb or the garage threshold, we cut them with a block splitter or saw to keep the line straight and tight.

Once laying is finished, kiln-dried sand goes into every joint with a brush and the area is vibrated with a plate compactor. That locks the blocks tight against each other, so many separate pieces become a single surface. We follow up with a second pass of sand after compaction, because the first always drops.

What affects the price in Stanmore

We do not publish a rate per square metre, because the number would be wrong for most properties. The survey is free and the price you get afterwards is fixed and in writing. These are the things that move it:

  • The block range you pick, which is the single biggest swing in most quotes
  • The laying pattern, because herringbone and the detailed patterns carry far more cutting
  • How much restraint the perimeter needs, and whether any of it is kerbed
  • The depth of sub-base the ground and the expected traffic call for
  • Cutting in around curves, manholes, gullies and the garage threshold
  • Clearing the old surface, and any drainage channel across the entrance

Looking after block paving

The joints are what need your attention. Top them up with kiln-dried sand every couple of years; it takes half an hour and helps the drive more than anything else, because empty joints let blocks move and let weeds root.

Use a pressure washer carefully, from a sensible distance. A concentrated jet held close can easily strip the sand out of the joints, so wash at a wide angle and re-sand afterwards. Get to any weeds early and they will pull out easily.

You can seal the drive if you want to. It deepens the colour and makes it easier to lift spills, but it needs redoing every few years. A block drive on a proper base lasts decades, and damaged blocks can be replaced with spares at any time.

Ready to book a free survey in Stanmore?

Block paving 04

Around Stanmore

As well as Stanmore itself, we take on block paving work in Edgware, Green Street, Totteridge, High Barnet, Monken Hadley and Arkley, and across the rest of London NW. If you are just outside the towns listed here it is still worth a call, because we cover more ground than any list of names can sensibly show.

Block Paving in Stanmore: Common Questions

Do you offer block paving in Stanmore?

Yes. We cover Stanmore as standard, including the HA7 postcode. Our base is in Hatfield, and the survey and the written quote are free wherever you are.

Do you charge for the survey or the quote?

No. We provide the survey and the written quotation free, and there is nothing to sign afterwards. We take no deposit, and nothing is due until the drive is finished.

How long will my drive be unusable?

For the working days we are on site. You can usually park on it as soon as the blocks are sanded and vibrated at the end, and we give the number of days to allow when we quote.

Can I see the blocks before I commit?

Yes, and we prefer it. We bring samples to the survey and lay them out on the ground, so you can see the colour against your brick rather than on a printed page.

Do I need a dropped kerb?

To drive across the pavement legally, yes. Applications go through the local highway authority rather than us. If you already have one, we check that it lines up with the new layout before we set anything out.

What do you do about the drainage at the entrance?

We deal with it as part of the work rather than leaving it to you. Depending on the falls, it means a channel drain across the threshold, a permeable block build-up so water drains down through the drive, or both.

What our customers say

What Our Customers Say

Genuine reviews from our customers across Hertfordshire and North London.

Want a price for block paving in Stanmore?

Call for a chat or send us a few details and we will arrange a free survey in Stanmore. You only pay once you're happy with the results.

Call UsGet a Quote