Hertsmere Driveways logo
Block paving 01

Barnet

Block Paving in Barnet

Block paving laid on a proper base, with the edges restrained so it stays put. Free survey, a fixed written price, and you only pay when you're happy with the work.

Free Quote in Barnet

Rated on TrustATrader

From 107 genuine customer reviews

Award-Winning

Driveway & Landscaping Company of the Year

Family-Run & Insured

Recommended by repeat customers

Guarantee

You don't pay until you're happy

Block Paving in Barnet, explained

Most block paving that goes wrong did not go wrong at the top. It spread at an unrestrained edge, or it sank where the sub-base was never compacted properly, and the blocks themselves were never the problem. So that is where the money goes on our quotes, and it is what we look at first when somebody asks us to put a failed drive right.

The choice in front of you is bigger than it looks. Block range, colour, size, texture, laying pattern, border, and whether you want a permeable block so the drive drains through itself. We bring the ranges to the survey and lay a few options out on the ground, because a block looks different in a brochure to how it looks next to your brick in daylight.

We are based in Hatfield and this area is part of our normal round. The survey and the written price are free, there is no deposit, and you settle up when the drive is finished, swept and signed off.

We cover the EN4 postcode in Barnet, and the rest of North London.

What your quote covers

  • A free survey with block ranges and patterns to look at on the ground
  • One fixed price in writing, no deposit, nothing payable until the job is done
  • Excavation to the depth the ground and the traffic actually call for
  • A compacted sub-base, a screeded laying course, and edge restraints haunched in concrete
  • Blocks laid to your pattern, cut in around manholes, kerbs and the threshold
  • Kiln-dried sand brushed in, the drive vibrated, a second sanding pass, and the site swept clean

Choosing block paving in Barnet

The main reason block paving is so forgiving is that it can be taken up and put back. A utility dig, a stained corner after a spill, or a section that has settled can all be dealt with by lifting the blocks, fixing the fault and relaying the original blocks. You do not get that with any other surface.

Your laying pattern does a structural job as well as setting the look. Herringbone is standard where a car sits because it interlocks under turning and braking loads. Stretcher and basketweave suit the paths and edges that only take foot traffic. At the survey we will look at your layout and talk through which works.

Ask about permeable blocks if drainage is tight. Wider joints filled with clean grit let water drain through the surface instead of off it. The trade-off that comes with any block paving is the joints, which need their sand kept topped up so weeds do not get a foothold.

Thinking about block paving in Barnet?

Block paving 02

From first visit to finished job

  1. Step 1

    Free Site Survey

    We measure the area and go through block ranges, colours and laying patterns with you.

  2. Step 2

    Written Quotation

    A fixed written price, with nothing to pay up front.

  3. Step 3

    Base Preparation

    We dig out, remove the spoil and build a firm, well-drained sub-base.

  4. Step 4

    Laying

    Blocks are laid to pattern, cut in neatly and locked with an edge restraint.

  5. Step 5

    Finishing

    Joints are filled with kiln-dried sand, the drive is compacted and swept, and you sign it off.

Block paving 03

What happens on site in Barnet

Groundwork comes first. We excavate to the depth needed for the build-up and compact the sub-base in layers, then set edge restraints early and haunch them in concrete. Without a restrained edge, a block drive tends to spread and go loose at the sides, and that is the most common single cause of the problem.

The compacted base gets a screeded laying course, and the blocks go down to the agreed pattern from the fixed edge. Cuts around manholes, kerbs and the garage threshold are done with a block splitter or a saw so lines stay straight and tight.

When the blocks are all down, we brush kiln-dried sand into every joint and go over the area with a plate compactor. The vibration locks the blocks against each other, turning separate pieces into one surface. A second pass of sand is brushed in after compaction because the first always drops.

What affects the price in Barnet

We do not publish a rate per square metre, because the number would be wrong for most properties. The survey is free and the price you get afterwards is fixed and in writing. These are the things that move it:

  • The block range you pick, which is the single biggest swing in most quotes
  • The laying pattern, because herringbone and the detailed patterns carry far more cutting
  • How much restraint the perimeter needs, and whether any of it is kerbed
  • The depth of sub-base the ground and the expected traffic call for
  • Cutting in around curves, manholes, gullies and the garage threshold
  • Clearing the old surface, and any drainage channel across the entrance

Looking after block paving

Joints first. Topping them up with kiln-dried sand every couple of years takes half an hour and helps the drive last longer than anything else will. Empty joints are where the trouble starts: blocks move and weeds root.

A pressure washer needs a careful hand and a sensible distance. Used close with a concentrated jet, it strips the joint sand straight out, so keep to a wide angle and re-sand afterwards. Any weeds pull out easily when you deal with them early.

Sealing is not essential. It deepens the colour and makes spills easier to lift, but it has to be redone every few years. Laid on a proper base, your drive will last decades, and damaged blocks can be swapped for spares at any point.

Ready to book a free survey in Barnet?

Block paving 04

Around Barnet

As well as Barnet itself, we take on block paving work in East Barnet, New Barnet, High Barnet, Barnet Gate and Underhill, and across the rest of North London. If you are just outside the towns listed here it is still worth a call, because we cover more ground than any list of names can sensibly show.

Block Paving in Barnet: Common Questions

Do you offer block paving in Barnet?

Yes. We cover Barnet as standard, including the EN4 postcode. We work out of Hatfield, and wherever you are, there is no charge for the survey or the written quote.

Do you charge for the survey or the quote?

No. Both the survey and the written quotation are free, and you have nothing to sign afterwards. There is no deposit and nothing to pay before the drive is finished.

How long will my drive be unusable?

For the working days we are on site. Most of the time, you can park on it once the blocks are sanded and vibrated at the end. The quote gives you the number of days to allow.

Can I see the blocks before I commit?

Yes, and it is what we would recommend. Samples come to the survey with us and get laid out on the ground, so you can judge the colour against your brick and not a printed page.

Do I need a dropped kerb?

Yes, to cross the pavement legally. The application is made to the local highway authority, not through us. If you already have one, we make sure it lines up with the new layout before setting anything out.

What do you do about the drainage at the entrance?

We take care of it as part of the job. Depending on the falls, it will be a channel drain across the threshold, a permeable block build-up so water drains through the drive, or both.

What our customers say

What Our Customers Say

Genuine reviews from our customers across Hertfordshire and North London.

Want a price for block paving in Barnet?

Call for a chat or send us a few details and we will arrange a free survey in Barnet. You only pay once you're happy with the results.

Call UsGet a Quote