Hertsmere Driveways logo
Block paving 01

St Albans

Block Paving in St Albans

Block paving laid on a proper base, with the edges restrained so it stays put. Free survey, a fixed written price, and you only pay when you're happy with the work.

Free Quote in St Albans

Rated on TrustATrader

From 107 genuine customer reviews

Award-Winning

Driveway & Landscaping Company of the Year

Family-Run & Insured

Recommended by repeat customers

Guarantee

You don't pay until you're happy

Block Paving in St Albans, explained

Most block paving that goes wrong did not go wrong at the top. It spread at an unrestrained edge, or it sank where the sub-base was never compacted properly, and the blocks themselves were never the problem. So that is where the money goes on our quotes, and it is what we look at first when somebody asks us to put a failed drive right.

The choice in front of you is bigger than it looks. Block range, colour, size, texture, laying pattern, border, and whether you want a permeable block so the drive drains through itself. We bring the ranges to the survey and lay a few options out on the ground, because a block looks different in a brochure to how it looks next to your brick in daylight.

We are based in Hatfield and this area is part of our normal round. The survey and the written price are free, there is no deposit, and you settle up when the drive is finished, swept and signed off.

We cover the AL1 and AL3 postcodes in St Albans, and the rest of Hertfordshire.

What your quote covers

  • A free survey with block ranges and patterns to look at on the ground
  • One fixed price in writing, no deposit, nothing payable until the job is done
  • Excavation to the depth the ground and the traffic actually call for
  • A compacted sub-base, a screeded laying course, and edge restraints haunched in concrete
  • Blocks laid to your pattern, cut in around manholes, kerbs and the threshold
  • Kiln-dried sand brushed in, the drive vibrated, a second sanding pass, and the site swept clean

Choosing block paving in St Albans

What makes block paving so easy to own is that it is built from separate pieces. A utility dig, a stain from a spill in one corner, a section that has settled: in each case we lift the blocks, fix what is wrong and put the same blocks back down. That is something no other driveway surface can offer.

The laying pattern you pick is a structural choice, not only a visual one. Herringbone is the norm for any area a car sits on, because the blocks interlock and hold firm when wheels turn and brake. On paths and edges that only take foot traffic, stretcher and basketweave work well. We will talk through which one suits your layout at the survey.

Tight drainage is a good reason to look at permeable blocks. Their joints are wider and filled with clean grit, so water drains down through the drive instead of across it. The downside of block paving of any kind sits in those joints, which need their sand topping up to keep the weeds out.

Thinking about block paving in St Albans?

Block paving 02

From first visit to finished job

  1. Step 1

    Free Site Survey

    We measure the area and go through block ranges, colours and laying patterns with you.

  2. Step 2

    Written Quotation

    A fixed written price, with nothing to pay up front.

  3. Step 3

    Base Preparation

    We dig out, remove the spoil and build a firm, well-drained sub-base.

  4. Step 4

    Laying

    Blocks are laid to pattern, cut in neatly and locked with an edge restraint.

  5. Step 5

    Finishing

    Joints are filled with kiln-dried sand, the drive is compacted and swept, and you sign it off.

Block paving 03

What happens on site in St Albans

Excavation goes to the depth the build-up needs, and the sub-base goes in and is compacted in layers. Early on, we install the edge restraints and haunch them in concrete, since a drive with an unrestrained edge is the one most likely to spread and work loose at the sides.

A laying course is screeded across the compacted base and the blocks go down to the agreed pattern, laid off the fixed edge. Any cuts, whether around a manhole, a kerb or the garage threshold, are made with a block splitter or a saw so the line stays tight and straight.

Once the last block is laid, we brush kiln-dried sand into all the joints and vibrate the area with a plate compactor. That locks each block against its neighbours and makes one surface out of many separate pieces. The first sanding always drops, so after compaction we brush in a second.

What affects the price in St Albans

We do not publish a rate per square metre, because the number would be wrong for most properties. The survey is free and the price you get afterwards is fixed and in writing. These are the things that move it:

  • The block range you pick, which is the single biggest swing in most quotes
  • The laying pattern, because herringbone and the detailed patterns carry far more cutting
  • How much restraint the perimeter needs, and whether any of it is kerbed
  • The depth of sub-base the ground and the expected traffic call for
  • Cutting in around curves, manholes, gullies and the garage threshold
  • Clearing the old surface, and any drainage channel across the entrance

Looking after block paving

Looking after block paving mostly comes down to the joints. Keep them full with a top-up of kiln-dried sand every couple of years; it is half an hour's work and does more for the drive's life than anything else. When joints empty, blocks start to move and weeds take root.

Pressure washing is fine if you are careful and stay a sensible distance back. A close, concentrated jet easily strips sand from the joints, so hold it at a wide angle and re-sand after. Weeds are simple to pull out while they are still small.

Whether to seal is your choice. A sealer deepens the colour and makes spills easier to lift, and it will need reapplying every few years. A block drive on a proper base lasts decades, and individual damaged blocks can be replaced with spares at any time.

Ready to book a free survey in St Albans?

Block paving 04

Around St Albans

As well as St Albans itself, we take on block paving work in Leverstock Green, Borehamwood, Watford, Woodside Park and Finchley Road, and across the rest of Hertfordshire. If you are just outside the towns listed here it is still worth a call, because we cover more ground than any list of names can sensibly show.

Block Paving in St Albans: Common Questions

Do you offer block paving in St Albans?

Yes. St Albans is one of our standard areas, and that includes the AL1 and AL3 postcodes. We operate from Hatfield, and you pay nothing for the survey or written quote, wherever you are.

Do you charge for the survey or the quote?

Neither costs anything. The survey is free, the written quotation is free, and there is nothing to sign afterwards. There is no deposit either; you pay once the drive is finished.

How long will my drive be unusable?

Just for the working days we are on site. Usually you can park on it once the blocks are sanded and vibrated at the end. The quote includes the number of days to allow.

Can I see the blocks before I commit?

Yes, and we encourage it. At the survey we lay samples out on the ground, so you can see the colour against your brick, not on paper.

Do I need a dropped kerb?

You need one to drive over the pavement legally. It is applied for through the local highway authority, not through us. If you have one, we check its position works with the new layout before anything is set out.

What do you do about the drainage at the entrance?

It is part of the job, so you do not have to sort it yourself. Based on the falls, we use a channel drain across the threshold, a permeable block build-up so the water goes down through the drive, or both.

What our customers say

What Our Customers Say

Genuine reviews from our customers across Hertfordshire and North London.

Want a price for block paving in St Albans?

Call for a chat or send us a few details and we will arrange a free survey in St Albans. You only pay once you're happy with the results.

Call UsGet a Quote