Hertsmere Driveways logo
Block paving 01

Enfield

Block Paving in Enfield

Block paving laid on a proper base, with the edges restrained so it stays put. Free survey, a fixed written price, and you only pay when you're happy with the work.

Free Quote in Enfield

Rated on TrustATrader

From 107 genuine customer reviews

Award-Winning

Driveway & Landscaping Company of the Year

Family-Run & Insured

Recommended by repeat customers

Guarantee

You don't pay until you're happy

Block Paving in Enfield, explained

Most block paving that goes wrong did not go wrong at the top. It spread at an unrestrained edge, or it sank where the sub-base was never compacted properly, and the blocks themselves were never the problem. So that is where the money goes on our quotes, and it is what we look at first when somebody asks us to put a failed drive right.

The choice in front of you is bigger than it looks. Block range, colour, size, texture, laying pattern, border, and whether you want a permeable block so the drive drains through itself. We bring the ranges to the survey and lay a few options out on the ground, because a block looks different in a brochure to how it looks next to your brick in daylight.

We are based in Hatfield and this area is part of our normal round. The survey and the written price are free, there is no deposit, and you settle up when the drive is finished, swept and signed off.

We cover the EN1 postcode in Enfield, and the rest of North London.

What your quote covers

  • A free survey with block ranges and patterns to look at on the ground
  • One fixed price in writing, no deposit, nothing payable until the job is done
  • Excavation to the depth the ground and the traffic actually call for
  • A compacted sub-base, a screeded laying course, and edge restraints haunched in concrete
  • Blocks laid to your pattern, cut in around manholes, kerbs and the threshold
  • Kiln-dried sand brushed in, the drive vibrated, a second sanding pass, and the site swept clean

Choosing block paving in Enfield

Being able to lift it up and put it back is what makes block paving the most forgiving driveway surface you can own. If a utility has to dig, a spill stains one corner or an area settles, the blocks are taken up, the problem is fixed and the same blocks are laid again. Nothing else offers that.

Pattern is as much about strength as appearance. Wherever a car will sit, herringbone is the standard, because it interlocks under the loads of turning and braking. Stretcher and basketweave are suited to paths and edges with only foot traffic on them. Which suits your layout is something we will talk through at the survey.

Where drainage is tight, it is worth asking us about permeable blocks. They have wider joints filled with a clean grit, so water drains through the surface rather than running off it. The weak point of any block paving is its joints, and their sand needs topping up or weeds will root in them.

Thinking about block paving in Enfield?

Block paving 02

From first visit to finished job

  1. Step 1

    Free Site Survey

    We measure the area and go through block ranges, colours and laying patterns with you.

  2. Step 2

    Written Quotation

    A fixed written price, with nothing to pay up front.

  3. Step 3

    Base Preparation

    We dig out, remove the spoil and build a firm, well-drained sub-base.

  4. Step 4

    Laying

    Blocks are laid to pattern, cut in neatly and locked with an edge restraint.

  5. Step 5

    Finishing

    Joints are filled with kiln-dried sand, the drive is compacted and swept, and you sign it off.

Block paving 03

What happens on site in Enfield

On site, the build-up dictates how deep we excavate. The sub-base is then compacted in layers, and the edge restraints are fitted early on and haunched in concrete, because the most common single reason for a block drive spreading and going loose at the sides is an edge with no restraint.

We screed a laying course over the compacted base and lay the blocks to the agreed pattern, always working off the fixed edge. Around manholes and kerbs and at the garage threshold, cuts are made with a block splitter or a saw to hold a straight, tight line.

With the blocks laid, every joint gets kiln-dried sand brushed in, and the whole area is vibrated with a plate compactor. That locks the blocks against each other so they work as one surface rather than many pieces. The first sanding always drops, which is why we brush in a second after compacting.

What affects the price in Enfield

We do not publish a rate per square metre, because the number would be wrong for most properties. The survey is free and the price you get afterwards is fixed and in writing. These are the things that move it:

  • The block range you pick, which is the single biggest swing in most quotes
  • The laying pattern, because herringbone and the detailed patterns carry far more cutting
  • How much restraint the perimeter needs, and whether any of it is kerbed
  • The depth of sub-base the ground and the expected traffic call for
  • Cutting in around curves, manholes, gullies and the garage threshold
  • Clearing the old surface, and any drainage channel across the entrance

Looking after block paving

Keeping the joints full does more for a block drive than anything else. A top-up of kiln-dried sand every couple of years is around half an hour's work. Let the joints empty and the blocks begin to move, and weeds find room to root.

Pressure wash with care, at a sensible distance. It is easy to strip sand out of the joints with a close, concentrated jet, so keep to a wide angle and re-sand after washing. If weeds do appear, pull them early and they come out easily.

Sealing is an option, not a requirement. It deepens the colour and makes spills easier to lift, and it needs redoing every few years. Built on a proper base, a block drive lasts for decades, and you can swap individual damaged blocks for spares whenever you like.

Ready to book a free survey in Enfield?

Block paving 04

Around Enfield

As well as Enfield itself, we take on block paving work in Southgate, Edmonton, Winchmore Hill, Bush Hill Park and Cockfosters, and across the rest of North London. If you are just outside the towns listed here it is still worth a call, because we cover more ground than any list of names can sensibly show.

Block Paving in Enfield: Common Questions

Do you offer block paving in Enfield?

Yes. Enfield is covered as standard, including the EN1 postcode. We work from our base in Hatfield, and the survey and written quote are free wherever you are.

Do you charge for the survey or the quote?

No. There is no charge for the survey or the written quotation, and nothing to sign afterwards. You pay no deposit and nothing at all until the drive is finished.

How long will my drive be unusable?

It is out of use for the working days we are on site. Usually you can park on it as soon as the blocks are sanded and vibrated at the end. We let you know how many days to allow when we quote.

Can I see the blocks before I commit?

Yes, and we would rather you did. We bring samples to the survey and put them down on the ground so you can see the colour against your brick, rather than on a printed page.

Do I need a dropped kerb?

A dropped kerb is needed to drive across the pavement legally. You apply to the local highway authority for it, not to us. If there is one already, we will check it lines up with the new layout before we set out.

What do you do about the drainage at the entrance?

We handle it within the job rather than leaving it with you. The falls decide whether that is a channel drain across the threshold, a permeable block build-up so the water drains down through the drive, or both.

What our customers say

What Our Customers Say

Genuine reviews from our customers across Hertfordshire and North London.

Want a price for block paving in Enfield?

Call for a chat or send us a few details and we will arrange a free survey in Enfield. You only pay once you're happy with the results.

Call UsGet a Quote