Cheshunt

Resin Driveways in Cheshunt

A smooth, free-draining resin bound drive, laid over a base built to hold it. Free survey, a fixed written price, and you only pay when you're happy with the work.

01992 272116 Get a Free Quote

Free Quote in Cheshunt

Rated on TrustATrader

From 107 genuine customer reviews

Award-Winning

Driveway & Landscaping Company of the Year

Family-Run & Insured

Recommended by repeat customers

Guarantee

You don't pay until you're happy

Resin Driveways in Cheshunt, explained

Two quite different surfaces get sold as resin, and the word on the quotation is often the only place the difference shows. Resin bonded is stone scattered over a tacky layer. Resin bound, which is what we lay, has the stone mixed right through the material and troweled flat, and only one of the two gives you a sealed surface that drains through itself.

Worth asking whoever else is pricing your drive. The cost, though, is decided underneath. Resin is a surface layer, so what matters is the state of the base below it and how much of that has to be rebuilt.

We find that out by digging rather than guessing, and what follows is a single fixed price on paper. Cheshunt and EN8 sit inside the area we cover from Hatfield. The stone blend is chosen on site, there is no deposit, and payment comes at the end.

We cover the EN8 postcode in Cheshunt, and the rest of Hertfordshire.

What your quote covers

A free site survey, with stone samples to hold up against the house
One fixed price in writing, with no deposit and nothing to pay up front
Lifting the old surface and carting the spoil away
A permeable sub-base compacted in layers, and a binder course where the base needs one
Resin and stone mixed on site and hand troweled, with edges, thresholds and drainage detailed in
A full sweep up, and payment only once you have walked the finished drive with us

Choosing resin driveways in Cheshunt

If rain comes off your drive in a sheet and heads for the kerb, or stands in a puddle at the bottom of the slope every winter, that is usually what brings people to resin. A resin bound surface is permeable: the water goes down through the finished layer into the ground below instead of travelling across it.

That is also the direction the SuDS guidance on front gardens points, and it is one of the reasons permeable surfacing tends not to need planning permission. The catch is that permeability is only as good as what sits underneath. A permeable surface over a base that cannot take water just moves the problem down a layer, so the base is what we are really assessing at the survey in Cheshunt.

The surface itself is stone mixed through clear resin and trowelled smooth, so there is no loose gravel to migrate and no jointing for weeds to find. You choose the blend from samples on the drive, against the house, which is the only way to judge how a stone will actually look in daylight.

Thinking about resin driveways in Cheshunt?

Get a Free Quote 01992 272116

From first visit to finished job

Step 1
Free Site Survey
We measure up, check the existing base and talk through stone colours and drainage.
Step 2
Written Quotation
You get a clear fixed price in writing before we begin.
Step 3
Groundwork
We excavate, remove the waste and build a permeable base that will hold the surface.
Step 4
Resin Laid
The stone and resin are mixed on site and troweled to a smooth, even finish.
Step 5
Cure and Sign-Off
The drive is usually walk-on ready the same day, and you settle up once you are happy.

What happens on site in Cheshunt

Nearly all of the work is underneath. We dig the existing drive out to the depth the new build-up requires, clear the spoil, and then put the sub-base in and compact it in successive layers rather than as one deep fill. Done properly it stays level; done quickly it dishes where the wheels sit.

What the dig reveals decides whether a binder course of tarmac or concrete goes on next, giving the resin a firm and even bed. The mixing happens on site, a batch at a time in a forced-action mixer, and each batch is trowelled out by hand before it begins to cure.

The resin goes down when conditions allow it to cure, which is not always the day we hoped. A wet surface or a hard frost means waiting, and we will tell you that rather than press on. Foot traffic is usually fine the same day, vehicles after a day or so.

What affects the price in Cheshunt

We do not publish a rate per square metre, because the number would be wrong for most properties. The survey is free and the price you get afterwards is fixed and in writing. These are the things that move it:

How much of the existing surface has to come out, and where the spoil goes
What we find underneath it: a sound base saves you a great deal, a failed one has to be rebuilt
The area, and how much of it is curves and cuts rather than straight runs
The stone blend you choose, because the aggregates are not all priced the same
Drainage, edgings, thresholds and any steps that form part of the job
Access, and in particular whether we can get a lorry and a mixer near the work

Looking after resin driveways

The routine is short. Keep leaves off it in autumn with a brush or a blower, because leaf litter left to rot is what moss establishes itself in on any surface that drains.

Washing down with a hose is normally enough. With a pressure washer, use a wide fan, keep your distance and keep it moving, as a tight jet held in one place will mark the resin. Use de-icing salt sparingly as well: occasional scattering is fine, heavy annual use is hard on the surface.

On a sound base the surface should give you 15 to 20 years. Repairs are local rather than wholesale, so a damaged patch is cut out and re-laid on its own without disturbing the rest of the drive.

Ready to book a free survey in Cheshunt?

Get a Free Quote 01992 272116

Around Cheshunt

As well as Cheshunt itself, we take on resin driveways work in Waltham Cross, Waltham Abbey, Ponders End, Enfield, Jubilee and Hale End, and across the rest of Hertfordshire. If you are just outside the towns listed here it is still worth a call, because we cover more ground than any list of names can sensibly show.

Resin Driveways in Cheshunt: Common Questions

Do you work in Cheshunt?

Yes, EN8 is one of our standard areas. We are based in Hatfield and the survey and written quotation are free wherever you are in the patch.

Is the quotation free?

It is, and so is the survey that produces it. Nothing to sign, no deposit, and nothing payable until you have seen the finished drive.

How soon can you begin?

It depends on the diary and the weather, because resin will not lay in rain or hard frost. We would rather give you a realistic window with the quote than a date that slips.

Do I need permission from the council?

Usually not for a permeable front-garden surface, which is what resin bound is, as it normally comes under permitted development. Listed buildings and conservation areas are the exceptions worth checking.

How long is the drive out of action?

Mostly for the groundwork rather than the surfacing. The resin goes down quickly once the base is ready. We will tell you how many days to set aside when we quote.

And if the weather turns?

Groundwork continues in most conditions. The resin waits until it can cure properly. We will come back and finish it rather than lay it in the wrong conditions to keep to a date.

What decides the price?

The state of the base and how much of it has to be dug out and rebuilt. We find that out by opening it up, then put one fixed figure in writing for the whole job.

How many years will it give me?

Fifteen to twenty on a base that was built to take it. The base and binder course decide most of that, long before the resin arrives.

Does it really drain through?

Yes, that is the point of resin bound. Rain filters through the surface into the ground below, so it does not pool at the foot of a sloping drive or run out onto the road.

Is the surface slippery when wet?

Not usually. You are walking on stone, and the water drains away instead of lying on top of it. Ice and fallen leaves deserve the same caution as on any driveway.