Hertsmere Driveways logo
Resin driveway 01

Hemel Hempstead

Resin Driveways in Hemel Hempstead

A smooth, free-draining resin bound drive, laid over a base built to hold it. Free survey, a fixed written price, and you only pay when you're happy with the work.

Free Quote in Hemel Hempstead

Rated on TrustATrader

From 107 genuine customer reviews

Award-Winning

Driveway & Landscaping Company of the Year

Family-Run & Insured

Recommended by repeat customers

Guarantee

You don't pay until you're happy

Resin Driveways in Hemel Hempstead, explained

Two quite different surfaces get sold as resin, and the word on the quotation is often the only place the difference shows. Resin bonded is stone scattered over a tacky layer. Resin bound, which is what we lay, has the stone mixed right through the material and trowelled flat, and only one of the two gives you a sealed surface that drains through itself.

Worth asking whoever else is pricing your drive. The cost, though, is decided underneath. Resin is a surface layer, so what matters is the state of the base below it and how much of that has to be rebuilt.

We open it up at the survey and then put one fixed figure in writing, rather than quoting a rate per square metre that would be wrong for most properties. Hemel Hempstead is part of our normal round from Hatfield, HP1 through HP3 included. No deposit, nothing up front, and you settle once the drive is done and you are happy with it.

We cover the HP1, HP2 and HP3 postcodes in Hemel Hempstead, and the rest of Hertfordshire.

What your quote covers

  • A free site survey, with stone samples to hold up against the house
  • One fixed price in writing, with no deposit and nothing to pay up front
  • Lifting the old surface and carting the spoil away
  • A permeable sub-base compacted in layers, and a binder course where the base needs one
  • Resin and stone mixed on site and hand trowelled, with edges, thresholds and drainage detailed in
  • A full sweep up, and payment only once you have walked the finished drive with us

Choosing resin driveways in Hemel Hempstead

Puddles at the bottom of the drive every winter are one of the most common reasons people in Hemel Hempstead look at resin bound driveways. It is a permeable surface: rain goes through the finished layer and down into the base, rather than running off towards the house or the road. That is also what the SuDS guidance on front gardens is after.

It looks the part too. Stone and clear resin are mixed together and trowelled smooth, so there is no loose gravel to end up on the path, nothing to rake back after the wind, and nothing for the dog to bring indoors. You choose the colour from stone blend samples on site, against your own brickwork.

That smooth face makes life easier for anyone wheeling a pram, a wheelchair or a bike to the front door. The main disadvantage of resin driveways is that they cannot hold together a base that is already moving or falling apart, because it is a surface layer and not a structural fix. If that is what we find underneath, you will hear it at the survey, along with a price for sorting the base first.

Thinking about resin driveways in Hemel Hempstead?

Resin driveway 02

From first visit to finished job

  1. Step 1

    Free Site Survey

    We measure up, check the existing base and talk through stone colours and drainage.

  2. Step 2

    Written Quotation

    You get a clear fixed price in writing before we begin.

  3. Step 3

    Groundwork

    We excavate, remove the waste and build a permeable base that will hold the surface.

  4. Step 4

    Resin Laid

    The stone and resin are mixed on site and trowelled to a smooth, even finish.

  5. Step 5

    Cure and Sign-Off

    The drive is usually walk-on ready the same day, and you settle up once you are happy.

Resin driveway 03

What happens on site in Hemel Hempstead

The job starts with excavation. We take the existing surface out to the depth the new build-up needs, remove the spoil, and build the sub-base in compacted layers instead of filling it in one go. That layering is the difference between a drive that stays level and one that develops ruts within a year.

On top of that sits a binder course, either tarmac or concrete depending on what we found below, giving the resin a solid, even base. The resin and stone are then batch-mixed on site in a forced-action mixer and trowelled out by hand while they are still workable.

Resin is fussy about conditions. It needs a dry surface and reasonable temperatures to cure, so if rain or a hard frost is on the way we will hold off rather than lay it to keep to schedule, and we will explain why. Most domestic drives are fine to walk on the same day and ready for cars after a day or so.

What affects the price in Hemel Hempstead

We do not publish a rate per square metre, because the number would be wrong for most properties. The survey is free and the price you get afterwards is fixed and in writing. These are the things that move it:

  • How much of the existing surface has to come out, and where the spoil goes
  • What we find underneath it: a sound base saves you a great deal, a failed one has to be rebuilt
  • The area, and how much of it is curves and cuts rather than straight runs
  • The stone blend you choose, because the aggregates are not all priced the same
  • Drainage, edgings, thresholds and any steps that form part of the job
  • Access, and in particular whether we can get a lorry and a mixer near the work

Looking after resin driveways

Upkeep is minimal. The main job is clearing leaves in autumn with a brush or blower, because organic matter left sitting on the surface is what moss feeds on. Beyond that, an occasional rinse with a hose will do, or a pressure washer set to a wide fan and held well back. Keep it moving, as a narrow jet close to the surface can harm any resin finish.

Use de-icing salt with a light hand. A sprinkle in a cold spell is fine; piling it on every year is hard on any surface. Any green growth on a section that sits in shade can be cleared with a proper patio or path biocide, no scrubbing needed.

Laid on a sound base, a resin drive should last 15 to 20 years. If part of it is ever damaged, that section can be cut out and re-laid as a patch rather than replacing the lot.

Ready to book a free survey in Hemel Hempstead?

Resin driveway 04

Around Hemel Hempstead

As well as Hemel Hempstead itself, we take on resin driveways work in Boxmoor, Latimer, Chesham Bois, Prestwood and Holmer Green, and across the rest of Hertfordshire. If you are just outside the towns listed here it is still worth a call, because we cover more ground than any list of names can sensibly show.

Resin Driveways in Hemel Hempstead: Common Questions

Do you offer resin driveways in Hemel Hempstead?

We do. Hemel Hempstead is one of our standard areas, including HP1, HP2 and HP3. We work from Hatfield, and the survey and written quote are free wherever you are based.

Do you charge for the survey or the quote?

Neither costs anything, and you are under no obligation afterwards. There is no deposit, and no payment is due until your drive is complete.

How soon could you start?

It depends on what we already have booked and what the weather is doing, because resin cannot be laid in the rain or a hard frost. We will give you an honest window with your quote, not a date we suspect we cannot hold.

Do I need planning permission for a resin driveway?

In most cases, no. Permeable front-garden surfacing generally counts as permitted development, and resin bound is a permeable surface. It varies by property, so if you are in a conservation area or the house is listed, it is worth asking your local council.

How long will my drive be out of use?

Less time than you might think for the surfacing, a bit more for the preparation. The groundwork takes the days, while the resin goes down quickly and you can use the drive again soon after. We tell you how many days to plan for when we quote.

What happens if the weather turns while you are working?

Most groundwork carries on regardless. Resin is different: it will not cure in wet or cold conditions. If the weather turns, we come back to finish it properly rather than lay a surface just to keep to a date.

How much do resin driveways cost?

A rate per square metre would be wrong for most drives, because the real cost sits underneath. Where the base is sound, the job is simpler; where it has broken up, it has to come out first. After a free survey we put a single fixed price in writing, and you pay nothing until the work is done.

How long do resin driveways last?

Expect 15 to 20 years from a resin drive built on a base designed to carry it. Lay it over a base that is already failing and it will show problems within a couple of winters, so we check and, where needed, rebuild the base first.

Are resin driveways permeable?

The resin bound surface we lay is permeable: rain soaks through it into the base instead of sitting on top or running off. It only works if what lies beneath can take the water too, so the base is checked and built for it at the survey.

Are resin driveways slippery?

Not in normal use. The finish is textured stone rather than a smooth coating, and rain drains through instead of lying on the surface. Wet leaves and ice make any drive slippery, so clearing leaves and a light scattering of salt in a cold snap are sensible.

What our customers say

What Our Customers Say

Genuine reviews from our customers across Hertfordshire and North London.

Want a price for resin driveways in Hemel Hempstead?

Call for a chat or send us a few details and we will arrange a free survey in Hemel Hempstead. You only pay once you're happy with the results.

Call UsGet a Quote